Untitled Document
#
#
#
#
#
 

Bezawit F. Haile, D.W. Jin, B.J. Yang, S.M. Park, H.K. Lee. (2019) "Multi-level homogenization for the prediction of the mechanical properties of ultra-high-performance concrete", Construction and Building Materials, accepted.

Kim, G.M., Nam, I.W., Yoon, H.N., Lee, H.K. and Park, S.M. (2019) "Carbon nanotube (CNT) incorporated cementitious composites for functional construction materials: The state of the art," Composite Structures, Vol. 227, pp. 111244.

Son, H.M., Park. S.M., Kim, H.Y., Seo, J.H. and Lee, H.K. (2019) " Effect of CaSO4 on hydration and phase conversion of calcium aluminate cement," Construction and Building Materials, Vol. 224, pp. 40-47.

Ryu, G.U. Kim, G.M., Khalid, R. Hammad and Lee, H.K. (2019). "The effects of temperature on the hydrothermal synthesis of hydroxyapatite-zeolite using blast furnace slag," Materials, Vol. 12, No. 13, pp. 2131.

Son, H.M., Park, S.M., Seo, J.H. and Lee, H.K. (2019). "Effect of CaSO4 incorporation on pore structure and drying shrinkage of alkali-activated binders," Materials, Vol. 12, No. 10, pp. 1673.

H.R. Khalid, N.K. Lee, Iqra Choudhry, Zhen Wang and H.K. Lee (2019). "Evolution of zeolite crystals in geopolymer-supported zeolites: effects of composition of starting materials," Materials Letters, Vol. 239, pp. 33-36.

Kim, G.M., Kim, Y.K., Kim, Y.J., Seo, J.H., Yang, B.J. and Lee. H.K. (2019). "Enhancement of the modulus of compression of calcium silicate hydrates via covalent synthesis of CNT and silica fume," Construction and Building Materials, Vol. 198, pp. 218-225.

N. Abbas, H.R. Khalid, G. Ban, H.T. Kim, H.K. Lee (2019). "Silica aerogel derived from rice husk: an aggregate replacer for lightweight and thermally insulating cement-based composites," Construction and Building Materials, Vol. 195, pp. 312-322.

Seo, J.H., Amr, I.T., Park, S.M., Bamagain, R., Fadhel, B., Kim, G.M., Hunaidy, A. and Lee. H.K. (2018). "CO2 uptake of carbonation-cured cement blended with ground volcanic ash," Materials, Vol. 11, No. 11, pp. 2187.

Park, S.M., Khalid, H.R., Seo J.H., Yoon, H.N., Son, H.M., Kim, H.Y., Lee, N.K., Lee, H.K. and Jang. J.G. (2018). "Pressure-induced geopolymerization in alkali activated fly ash," Sustainability, Vol. 10, No. 10, pp. 3538.

I.W. Nam, J.H. Choi, C.G. Kim, and H.K. Lee. (2018). "Fabrication and design of electromagnetic wave absorber composed of carbon nanotube-incorporated cement composites,” Composite Structures, Vol. 206, pp. 439-447.

H.R. Khalid, I.W. Nam, I. Choudhry, H.K. Lee, L. Zheng (2018). "Piezoresistive characteristics of CNT fiber-reinforced GFRP composites prepared with diversified fabrication schemes," Composite Structures, Vol. 203, pp. 835-843.

Park, S.M., Jang, J.G. and Lee, H.K. (2018). "Unlocking the role of MgO in carbonation of alkali-activated slag cements,” Inorganic Chemistry Frontiers, Vol. 5, No. 7, pp. 1661-1670.

Yoon, H.N., Park, S.M. and Lee, H.K. (2018). "Effect of MgO on chloride penetration resistance of alkali-activated binder,” Construction & Building Materials, Vol. 178, pp. 584-592.

Kim, G.M., Yoon, H.N. and Lee, H.K. (2018). "Autogenous shrinkage and electrical characteristics of cement pastes and mortars with carbon nanotube and carbon fiber,” Construction & Building Materials, Vol. 177, pp. 428-435.

Kim, H.K. and Lee, H.K. (2018). "Hydration kinetics of high-strength concrete with untreated coal bottom ash for internal curing,” Cement and Concrete Composites, Vol. 91, pp. 67-75.

Son, H.M., Kim, H.Y., Park, S.M. and Lee, H.K. (2018). "Ureolytic/non-ureolytic bacteria co-cultured self-healing agent for cementitious materials crack repair,” Materials, Vol. 11, No. 5, pp. 782.

H.R. Khalid, N.K. Lee, S.M. Park, N. Abbas and H.K. Lee (2018). "Synthesis of geopolymer-supported zeolites via robust one-step method and their adsorption potential,” Journal of Hazardous Materials, Vol. 353, pp. 522-533.

Park, S.M., Seo, J.H. and Lee, H.K. (2018). "Binder chemistry of sodium carbonate-activated CFBC fly ash,” Materials and Structures, Vol. 51, pp. 59.

Seo, J.H., Park, S.M. and Lee, H.K. (2018). "Evolution of the binder gel in carbonation-cured Portland cement in an acidic medium,” Cement and Concrete Research, Vol. 109, pp. 81-89.

Kim, G.M., Yang, B.J., Yoon, H.N. and Lee, H.K. (2018). "Synergistic effects of carbon nanotube and carbon fiber on heat generation and electrical characteristics of cementitious composites,” Carbon, Vol. 134, pp. 283-292.

Son, H.M., Park, S.M., Jang, J.G. and Lee, H.K. (2018). "Effect of nano-silica on hydration and conversion of calcium aluminate cement,” Construction & Building Materials, Vol. 169, pp. 819-825.

H.R. Khalid, S.K. Ha, S.M. Park, Z. Wang and Lee, H.K. (2018). "Bond characteristics of SFRP composites containing FRP core/anchors coated on geopolymer mortar,” Composite Structures, Vol. 189, pp. 435-442.

Kim, G.M., Nam, I.W, Yoon, H.N. and Lee, H.K. (2018). "Effect of superplasticizer type and siliceous materials on the dispersion of carbon nanotube in cementitious composites,” Composite Structures, Vol. 185, pp. 264-272.

Z. Wang, H.R. Khalid, J.H. Seo, Jingfu Kang, H.K. Lee. (2018). "Pull-off bond behavior of anchored random-chopped FRP composites bonded to concrete,” Composite Structures, Vol. 185, pp.193-202.

Park, S.M., Seo, J.H. and Lee, H.K. (2018). "Thermal evolution of hydrates in carbonation-cured Portland cement,” Materials and Structures, Vol. 51, pp. 7.

Kim, H.J. and Lee, H.K. (2017). "Mineral Sequestration of Carbon Dioxide in Circulating Fluidized Bed Combustion Boiler Bottom Ash,” Minerals, Vol. 7, No. 12, pp. 237.

Kim, G.M., Khalid, Hammad R., Park, S.M. and Lee, H.K. (2017). "Flow property of alkali activated slag with modified precursor,” ACI Materials Journal, Vol. 114, No. 6, pp. 867-876.

Park, S.M., Lee, N.K. and Lee, H.K. (2017). "Circulating fluidized bed combustion ash as controlled low-strength material (CLSM) by alkaline activation,” Construction & Building Materials, Vol. 156, pp. 728-738.

Nam, I.W., Park, S.M., Lee, H.K. and Zheng, L. (2017). "Mechanical properties and piezoresistive sensing capabilities of FRP composites incorporating CNT fiber,” Composite Structures, Vol. 189, pp. 1-8.

Park, S.M., Jang, J.G., Son, H.M. and Lee, H.K. (2017). "Stable conversion of metastable hydrates in calcium aluminate cement by early carbonation curing,” Journal of CO2 Utilization, Vol. 21, pp. 224-226.

Jang, J.G., Park, S.M., Kim, G.M., Lee, H.K. (2017). "Stability of MgO-modified geopolymeric gel structure exposed to a CO2-rich environment,” Construction & Building Materials, Vol. 151, pp. 178-185.

Kim, G.M., Park, S.M., Ryu, G.U. and Lee, H.K. (2017). "Electrical characteristics of hierarchical conductive pathways in cementitious composites incorporating CNT and carbon fiber,” Cement and Concrete Composites, Vol. 82, pp. 165-175.

Faizan Naeem, Lee, H.K., Kim, H.K. and Nam, I.W. (2017). "Flexural stress and crack sensing capabilities of MWNT/cement composites,” Composite Structures, Vol. 175, pp. 86-100. Composite Structures, Vol. 175, pp. 86-100.

Jang, J.G., Park, S.M. and Lee, H.K. (2017). "Cesium and strontium retentions governed by aluminosilicate gel in alkali-activated cements,” Materials, Vol. 10, No. 4, 447.

Lee, N.K., Khalid, H.R. and Lee, H.K. (2017). "Adsorption characteristics of Cesium onto mesoporous geopolymers containing nano-crystalline zeolites,” Microporous and Mesoporous Materials, Vol. 242, pp. 238-244.

Kim, G.M., Jang, J.G., Khalid, H.R. and Lee, H.K. (2017). "Water purification characteristics of pervious concrete fabricated with CSA cement and bottom ash aggregates,” Construction & Building Materials, Vol. 136, pp. 1-8.

Kim, G.M., Yang, B.J., Cho, K.J., Kim, E.M. and Lee, H.K. (2017). “Influences of CNT dispersion and pore characteristics on the electrical performance of cementitious composites,” Composite Structures, Vol. 164, pp. 32-42. , Vol. 164, pp. 32-42.

Kim, G.M., Khalid, H.R., Kim, H.J. and Lee, H.K. (2017). “Alkali activated slag pastes with surface-modified blast furnace slag,” Cement and Concrete Composites, Vol. 76, pp. 39-47. , Vol. 76, pp. 39-47.

Park, S.M., Yang, B.J., Kim, B.R., Ha, S.K. and Lee, H.K. (2017). “Structural strengthening and damage behaviors of hybrid sprayed fiber-reinforced polymer (SFRP) composites containing carbon fiber cores,” International Journal of Damage Mechanics, Vol. 26, No. 2, pp. 358-376.

Jang, J.G., Kim, G.M., Kim, H.J. and Lee, H.K. (2016). “Review on recent advances in CO2 utilization and sequestration technologies in cement-based materials,” Construction & Building Materials, Vol. 127, pp. 762-773. Construction & Building Materials, Vol. 127, pp. 762-773.

Kim, G.M., Yang, B.J., Ryu, G.U. and Lee, H.K. (2016). “The electrically conductive carbon nanotube (CNT)/cement composites for accelerated curing and thermal cracking reduction,” Composite Structures, Vol. 158, pp. 20-29. Composite Structures, Vol. 158, pp. 20-29.

Kim, H.K., Ha, K.A. and Lee, H.K. (2016). “Internal-curing efficiency of cold-bonded coal bottom ash aggregate for high-strength mortar,” Construction & Building Materials, Vol. 126, pp. 1-8.

Park, S.M., Jang, J.G., Lee, N.K. and Lee, H.K. (2016). “Physicochemical properties of binder gel in alkali-activated fly ash/slag exposed to high temperatures,” Cement and Concrete Research, Vol. 89, pp. 72-79.

Jang, J.G., Park, S.M. and Lee, H.K. (2016). “Physical barrier effect of geopolymeric waste form on diffusivity of cesium and strontium,” Journal of Hazardous Materials , Vol. 318, pp. 339-346.

Nam, I.W., Souri, H. and Lee, H.K. (2016). “Percolation threshold and piezoresistive response of multi-wall carbon nanotube/cement composites,” Smart Structures and Systems, Vol. 18, pp. 217-231.

Lee, N.K. and Lee, H.K. (2016). “Influence of the slag content on the chloride and sulfuric acid resistances of alkali-activated fly ash/slag paste,” Cement and Concrete Composites, Vol. 72, pp. 168-179.

Ahn, Y.B., Jang, J.G. and Lee, H.K. (2016). “Mechanical properties of lightweight concrete made with coal ashes after exposure to elevated temperatures,” Cement and Concrete Composites, Vol. 72, pp. 27-38.

Kim, H.K. and Lee, H.K. (2016). “Autogenous shrinkage reduction with untreated coal bottom ash for high-strength concrete,” ACI Materials Journal, Vol. 113, pp. 277-285.

Nam, I.W. and Lee, H.K. (2016). “Synergistic effect of MWNT/fly ash incorporation on the EMI shielding/absorbing characteristics of cementitious materials,” Construction & Building Materials, Vol. 115, pp. 651-661.

Park, S.M., Jang, J.G., Chae, S.A. and Lee, H.K. (2016). “An NMR spectroscopic investigation of aluminosilicate gel in alkali-activated fly ash in a CO2-rich environment,” Materials, Vol. 9, No. 5, 308.

Lee, N.K., Khalid, H.R. and Lee, H.K. (2016). “Synthesis of mesoporous geopolymers containing zeolite phases by a hydrothermal treatment,” Microporous and Mesoporous Materials, Vol. 229, pp. 22-30.

Lee, N.K., Kim, E.M. and Lee, H.K. (2016). “Mechanical properties and setting characteristics of geopolymer mortar using styrene-butadiene (SB) latex,” Construction & Building Materials, Vol. 113, pp. 264-272.

Jang, J.G. and Lee, H.K. (2016). “Microstructural densification and CO2 uptake promoted by the carbonation curing of belite-rich Portland cement,” Cement and Concrete Research, Vol. 82, pp. 50-57.

Jang, J.G., Kim, H.J., Kim, H.K. and Lee, H.K. (2016). “Resistance of coal bottom ash mortar against the coupled deterioration of carbonation and chloride penetration,” Materials & Design, Vol. 93, pp. 160-167.

Ha, S.K., Lee, H.K. and Kang, I.S. (2016). “Structural behavior and performance of water pipes rehabilitated with a fast-setting polyurea-urethane lining,” Tunnelling and Underground Space Technology, Vol. 52, pp. 192-201.

Jang, J.G. and Lee, H.K. (2016). “Effect of fly ash characteristics on delayed high-strength development of geopolymers,” Construction & Building Materials, Vol. 102, pp. 260-269.

Kim, G.M., Naeem, F., Kim, H.K., and Lee, H.K. (2016). “Heating and heat-dependent mechanical characteristics of CNT-embedded cementitious composites,” Composite Structures, Vol. 136, pp. 162-170.

Nam, I.W. and Lee, H.K. (2015). “Image analysis and DC conductivity measurement for the evaluation of carbon nanotube distribution in cement matrix,” International Journal of Concrete Structures and Materials, Vol.9, No. 4, pp. 427-438.

Souri, H., Nam, I.W., Lee, H.K. (2015). “Electrical properties and piezoresistive evaluation of polyurethane-based composites with carbon nano-materials,” Composites Science and Technology, Vol. 121, pp. 41-48.

Souri, H., Nam, I.W., and Lee, H.K. (2015). “A zinc oxide/polyurethane-based generator composite as a self-powered sensor for traffic flow monitoring,” Composite Structures, Vol. 134, No. 15, pp. 579-586.

Hammad R. Khalid, Ha, S.K., Park, S.M., Kim, G.M., and Lee, H.K. (2015). “Interfacial bond behavior of FRP fabrics bonded to fiber-reinforced geopolymer mortar,” Composite Structures, Vol. 134, pp. 353-368.

Kim, G.M., Jang, J.G., Naeem, F., and Lee, H.K. (2015). “Heavy metal leaching, CO2 uptake and mechanical characteristics of carbonated porous concrete with alkali-activated slag and bottom ash,” International Journal of Concrete Structures and Materials,, Vol. 9, No. 3, pp. 283-294.

Jang, J.G., Kim, H.J., Park, S.M. and Lee, H.K. (2015). “The influence of sodium hydrogen carbonate on the hydration of cement,” Construction & Building Materials, Vol. 94, pp. 746-749.

Ha, S.K., Hammad R. Khalid, Park, S.M. and Lee, H.K. (2015). “Interfacial crack-induced debonding behavior of sprayed FRP laminate bonded to RC beams,” Composite Structures, Vol. 125, pp. 176–187.

Kim, H.K. and Lee, H.K. (2015). “Coal bottom ash in field of civil engineering: A review of advanced applications and environmental considerations,” KSCE Journal of Civil Engineering, Vol. 19, No. 6, pp. 1802-1818.

Lee, N.K. and Lee, H.K. (2015). “Reactivity and reaction products of alkali-activated, fly ash/slag paste,” Construction & Building Materials, Vol. 81, pp. 303-312.

Jang, J.G., Ahn, Y.B., Souri, H. and Lee, H.K. (2015). “A novel eco-friendly porous concrete fabricated with coal ash and geopolymeric binder: Heavy metal leaching characteristics and compressive strength,” Construction & Building Materials, Vol. 79, pp. 173-181.

Yang, B.J., Na, S., Jang, J.G., Kim, H.K. and Lee, H.K. (2015). “Thermo-mechanical analysis of road structures used in the on-line electric vehicle system,” Structural Engineering and Mechanics, Vol. 53, No. 3, pp. 519-536.

Ha, S.K., Na, S., Bang, Y.K. and Lee, H.K. (2015). “An experimental study on sag-resistance ability and applicability of sprayed FRP system on vertical and overhead concrete surfaces,” Materials and Structures, Vol. 48, pp. 21-33.

Ha, S.K., Jang, J.G., Park, S.H. and Lee, H.K. (2015). “Advanced spray multi-layup process for quality control of sprayed FRP composites used to retrofit concrete structures,” Journal of Construction Engineering and Management (ASCE), Vol. 141, pp. 04014060.

Yang, B.J., Cho, K.J., Kim, G.M. and Lee, H.K. (2014). “Effect of CNT agglomeration on the electrical conductivity and percolation threshold of nanocomposites: A micromechanics-based approach,” CMES: Computer Modeling in Engineering & Sciences,, Vol. 103, No. 5, pp. 343-365.

Kim, H.K., Jang, J.G., Choi, Y.C. and Lee, H.K. (2014). “Improved chloride resistance of high-strength concrete amended with coal bottom ash for internal curing,” Construction and Building Materials, Vol. 71, pp. 334-343.

Lee, N.K., Jang, J.G. and Lee, H.K. (2014). “Shrinkage characteristics of alkali-activated fly ash/slag paste and mortar at early ages,” Cement and Concrete Composites, Vol. 53, pp. 239-248.

Park, S.J., Jang, J.G. and Lee, H.K. (2014). “Computational investigation of the neutron shielding and activation characteristics of borated concrete with polyethylene aggregate,” Journal of Nuclear Materials, Vol. 452, pp. 205-211.

Kim, H.K., Park, I.S. and Lee, H.K. (2014). “Improved piezoresistive sensitivity and stability of CNT/cement mortar composites with low water-binder ratio,” Composite Structures, Vol. 116, pp. 713-719.

Yang, B.J., Souri, H., Kim, S., Ryu, S. and Lee, H.K. (2014). “An analytical model to predict curvature effects of the carbon nanotube on the overall behavior of nanocomposites,” Journal of Applied Physics, Vol. 116, No. 3, pp. 033511.

Yang, B.J., Ha, S.K., Pyo, S.H. and Lee, H.K. (2014). “Mechanical characteristics and strengthening effectiveness of random-chopped FRP composites containing air voids,” Composites Part B: Engineering, Vol. 62, pp. 159-166.

Jang, J.G., Kim, H.K., Kim, T.S., Min, B.J. and Lee, H.K. (2014). “Improved flexural fatigue resistance of PVA fiber-reinforced concrete subjected to freezing and thawing cycles,” Construction & Building Materials, Vol. 59, pp. 129-135.

Yang, B.J., Shin, H., Kim, H. and Lee, H.K. (2014). “Strain rate and adhesive energy dependent viscoplastic damage modeling for nanoparticulate composites: Molecular dynamics and micromechanical simulations,” Applied Physics Letters, Vol. 104, No. 10, pp. 101901.

Jang, J.G., Lee, N.K. and Lee, H.K. (2014). “Fresh and hardened properties of alkali-activated fly ash/slag pastes with superplasticizers,” Construction & Building Materials, Vol. 50, pp. 169-176.

Kim, H.K., Nam, I.W. and Lee, H.K. (2014). “Enhanced effect of carbon nanotube on mechanical and electrical properties of cement composites by incorporation of silica fume,” Composite Structures, Vol. 107, pp. 60-69.

Yang, B.J., Shin, H., Lee, H.K. and Kim, H. (2013). “A combined molecular dynamics/micromechanics/finite element approach for multiscale constitutive modeling of nanocomposites with interface effects,” Applied Physics Letters, Vol. 103, No. 24, pp. 241903.

Lee, N.K., Kim, H.K., Park, I.S. and Lee, H.K. (2013). “Alkali-activated, cementless, controlled low-strength materials (CLSM) utilizing industrial by-products,” Construction & Building Materials, Vol. 49, pp. 738-746.

Na, S. and Lee, H.K. (2013). “Neural network approach for damaged area location prediction of a composite plate using electromechanical impedance technique,” Composites Science and Technology, Vol. 88, pp. 62-68.

Yang, J.K., Lee, C.G., Jeon, J.H. and Lee, H.K. (2013). “Selection and Management Factor Analysis of Urban Infrastructure for U-City Construction,” KSCE Journal of Civil Engineering, Vol. 17, No. 7, pp. 1637-1643.

Lee, N.K. and Lee, H.K. (2013). “Setting and mechanical properties of alkali-activated fly ash/slag concrete manufactured at room temperature,” Construction & Building Materials,, Vol. 47, pp. 1201–1209.

Na, S. and Lee, H.K. (2013). “A multi-sensing electromechanical impedance method for non destructive evaluation of metallic structures,” Smart Materials and Structures, Vol. 22, No. 9, pp. 095011.

Shang, S., Yun, G.J., Kim, B.R. and Lee, H.K. (2013). "Parameter estimation of a rate-dependent damage constitutive model for damage-tolerant brittle composites by Self-OPTIM analyses", International Journal of Damage Mechanics, Vol. 22, No. 5, pp. 699-718.

Ha, S.K, Na, S. and Lee, H.K. (2013). “Bond characteristics of sprayed FRP composites bonded to concrete substrate considering various concrete surface conditions,” Composite Structures, Vol. 100, pp. 270-279.

Kim, H.K. and Lee, H.K. (2013). "Effects of high volume of fly ash, blast furnace slag, and bottom ash on flow characteristics, density, and compressive strengths of high-strength mortar", ASCE's Journal of Materials in Civil Engineering, Vol. 25, No. 5, pp. 662-665.

Yang, B.J., Hwang, Y.Y. and Lee, H.K. (2013). “Elastoplastic modeling of polymeric composites containing randomly located nanoparticles with an interface effect,” Composite Structures, Vol. 99, pp. 123-130.

Na, S. and Lee, H.K. (2013). “Steel wire electromechanical impedance method using a piezoelectric material for composite structures with complex surfaces,” Composite Structures, Vol. 98, pp. 79-84.

Kim, H.K., Park, S.J., Han, J.I. and Lee, H.K. (2013). "Microbially mediated calcium carbonate precipitation on normal and lightweight concrete", Construction and Building Materials, Vol. 38, pp. 1073-1082.

Kim, H.K., Hwang, E.A. and Lee, H.K. (2012). "Impacts of metakaolin on lightweight concrete by type of fine aggregate", Construction and Building Materials, Vol. 36, pp. 719-726.

Na, S. and Lee, H.K. (2012). "A technique for improving the damage detection ability of electro-mechanical impedance method on concrete structures", Smart Materials and Structures, Vol. 21, No. 8, 085024.

Na, S. and Lee, H.K. (2012). “Resonant frequency range utilized electro-mechanical impedance method for damage detection performance enhancement on composite structures,” Composite Structures, Vol. 94, No. 8, pp. 2383-2389.

Choi, Y.W., Lee, H.K., Chu, S.B., Cheong, S.H. and Jung, W.Y. (2012). “Shear behavior and performance of deep beams made with self-compacting concrete,” International Journal of Concrete Structures and Materials, Vol. 6, No. 2, pp. 65-78.

Yang, B.J., Kim, B.R. and Lee, H.K. (2012). “Micromechanics-based viscoelastic damage model for particle-reinforced polymeric composites,” Acta Mechanica, Vol. 223, No. 6, pp. 1307-1321.

Nam, I.W., Lee, H.K., Sim, J.B. and Choi, S.M. (2012). “Electromagnetic characteristics of cement matrix materials with carbon nanotubes,” ACI Materials Journal, Vol. 109, No. 3, pp. 363-370.

Nam, I.W., Kim, H.K. and Lee, H.K. (2012). “Influence of silica fume additions on electromagnetic interference shielding effectiveness of multi-walled carbon nanotube/cement composites,” Construction & Building Materials, Vol. 30, pp. 480-487.

Na, S., Tawie, R. and Lee, H.K. (2012). “Electro-mechanical impedance method of fiber-reinforced plastic adhesive joints in corrosive environment using a reusable piezoelectric device,” Journal of Intelligent Material Systems & Structures, Vol. 23(7), pp. 737-747.

Kim, H.K., Jeon, J.H. and Lee, H. K. (2012). “Workability, and mechanical, acoustic and thermal properties of lightweight aggregate concrete with a high volume of entrained air,” Construction and Building Materials, Vol. 29, pp. 193-200.

Yang, B.J., Kim, B.R. and Lee, H.K. (2012). “Predictions of viscoelastic strain-rate dependent behavior of fiber-reinforced polymeric composites,” Composite Structures, Vol. 94, No. 4, pp. 1420-1429.

Kim, H.K., Jeon, J.H. and Lee, H.K. (2012). “Flow, water absorption, and mechanical characteristics of normal- and high-strength mortar incorporating fine bottom ash aggregates,” Construction and Building Materials, Vol. 26, No. 1, pp. 249-256.

Nam, I.W., Lee, H.K. and Jang, J.H. (2011). “Electromagnetic interference shielding/absorbing characteristics of CNT-embedded epoxy composites,” Composites Part A: Applied Science & Manufacturing, Vol. 42, No. 9, pp. 1110-1118.

Kim, B.R., Pyo, S.H., Lemaire, G. and Lee, H.K. (2011). “Multiscale approach to predict the effective elastic behavior of nanoparticle-reinforced polymer composites,” Interaction and Multiscale Mechanics, Vol. 4, No. 3, pp. 173-185.

Tawie, R. and Lee, H.K. (2011). “Characterization of cement-based materials using a reusable piezoelectric impedance-based sensor,” Smart Materials and Structures, Vol. 20, No. 8, 085023. (doi:10.1088/0964-1726/20/8/085023)

Kim, B.R., Lee, H.K., Park, S.H. and Kim, H.K. (2011). “Electromagnetic interference shielding characteristics and shielding effectiveness of polyaniline-coated films,” Thin Solid Films, Vol. 519, No. 11, pp. 3492-3496.

Kim, H.K. and Lee, H.K. (2011). “Use of power plant bottom ash as fine and coarse aggregates in high-strength concrete,” Construction and Building Materials, Vol. 25, No. 2, pp. 1115-1122.

Kwon, S.H., Kim, B.R. and Lee, H.K. (2011). “Electromagnetic shielding effectiveness of grid-mesh films made of polyaniline: a numerical approach,” Computers, Materials, & Continua, Vol. 21, No. 1, pp. 65-86.

Kim, B.R. and Lee, H.K. (2011). “Elastic-damage modeling for particulate composites considering cumulative damage,” International Journal of Damage Mechanics,, Vol. 20, No. 1, pp. 131-158.

Lee, H.K., Cheong, S.H., Ha, S.K. and Lee, C.G. (2011). “Behavior and performance of RC T-section deep beams externally strengthened in shear with CFRP sheets,” Composite Structures, Vol. 93, pp. 911-922.

Lee, H.K., Cheong, S.H. and Ha, S.K. (2010) “Shear behavior and performance of deep beams reinforced with a honeycomb steel mesh,” Advances in Structural Engineering, Vol. 13, No. 6, pp. 989-999.

Tawie, R. and Lee, H.K. (2010). “Piezoelectric-based non-destructive monitoring of hydration of reinforced concrete as an indicator of bond development at the steel-concrete interface,” Cement and Concrete Research, Vol. 40, pp. 1697-1703.

Tawie, R. and Lee, H.K. (2010). “Monitoring the strength development in concrete using EMI sensing technique,” Construction and Building Materials, Vol. 24, No. 9, pp. 1746-1753. Construction and Building Materials, Vol. 24, No. 9, pp. 1746-1753.

Kim, B.R., Lee, H.K., Kim, E. and Lee, S.H. (2010). “Intrinsic electromagnetic radiation shielding/absorbing characteristics of polyaniline-coated transparent thin films,” Synthetic Metals, Vol. 160, pp. 1838-1842.

Tawie, R. Lee, H.K. and Park, S.H. (2010). “Non-destructive evaluation of concrete quality using PZT transducers,” Smart Structures and Systems, Vol. 6, No. 7, pp. 851-866.

Ha, S.K., Lee, H.K. and Kang, I.S. (2010) “Shear behavior and performance of RC beams with polymer mortar systems under cyclic loading,” Journal of Reinforced Plastics and Composites, Vol. 29, No.17, pp. 2604-2620.

Kim, H.K. and Lee, H.K. (2010). “Influence of cement flow and aggregate type on the acoustic characteristics of porous concrete,” Applied Acoustics, Vol. 71, No. 7, pp. 607-615.

Lee, H.K. and Song, S.Y. (2010). “Influence of fiber volume fraction and fiber type on mechanical properties of FRLACC,” Journal of Reinforced Plastics and Composites, Vol. 29, No. 7, pp. 1089-1098.

Kim, B.R. and Lee, H.K. (2010). “Elastoplastic modeling of circular fiber-reinforced ductile matrix composites considering a finite RVE,” International Journal of Solids and Structures, Vol. 47, No. 6, pp. 827-836.

Kim, H.K. and Lee, H.K. (2010). “Acoustic absorption modeling of porous concrete considering the gradation and shape of aggregates and void ratio,” Journal of Sound and Vibration, Vol. 329, No. 7, pp. 866-879.

Lee, H.K. and Song, S.Y. (2010). “Performance characteristics of lightweight aggregate cellular concrete containing polypropylene fibers,” Journal of Reinforced Plastics and Composites, Vol. 29, No. 6, pp. 883-898.

Kim, B.R. and Lee, H.K. (2010). “Closed form solution of the exterior-point Eshelby tensor for an elliptic cylindrical inclusion,” Journal of Applied Mechanics-ASME, Vol. 77, No. 2, pp. 024503 1-5.

Lee, H.K. and Tran, X.H. (2010). “On stress analysis for a penny-shaped crack interacting with inclusions and voids,” International Journal of Solids and Structures, Vol. 47, No. 5, pp. 549-558.

Lee, H.K., Kim, H.K. and Hwang, E.A. (2010). “Utilization of power plant bottom ash as aggregates in fiber-reinforced cellular concrete,” Waste Management, Vol. 30, No. 2, pp. 274-284.

Pyo, S.H. and Lee, H.K. (2010). “An elastoplastic damage model for metal matrix composites considering progressive imperfect interface under transverse loading,” International Journal of Plasticity, Vol. 26, No. 1, pp. 25-41.

Tran, X.H., Tawie , R. and Lee, H.K. (2009). “A systematic approach for the development of porous concrete based on axiomatic design theory,” Computers and Concrete, (invited), Vol. 6, No. 6, pp. 491-503.

Lee, H.K. and Pyo, S.H. (2009). “3D-damage model for fiber-reinforced brittle composites with microcracks and imperfect interfaces,” Journal of Engineering Mechanics-ASCE, Vol. 135, No. 10, pp. 1108-1118.

Kim, B.R. and Lee, H.K. (2009). “An RVE-based micromechanical analysis of fiber-reinforced composites considering fiber size dependency,” Composite Structures, Vol. 90 , No. 4 , pp. 418-427.

Kwon, S.H. and Lee, H.K. (2009). “A computational approach to investigate electromagnetic shielding effectiveness of steel fiber reinforced mortar,” Computers, Materials, & Continua, Vol. 12, No. 3, pp. 197-221.

Pyo, S.H. and Lee, H.K. (2009). “Micromechanics-based elastic-damage analysis of laminated composite structures,” International Journal of Solids and Structures, Vol. 46, No. 17, pp. 3138-3149.

Kim, B.R. and Lee, H.K. (2009). “Modeling of particle debonding and void evolution in particulate ductile matrix composites,” CMES: Computer Modeling in Engineering & Sciences, Vol. 47, no. 3, pp. 253-281.

Pyo, S.H. and Lee, H.K. (2009). “Micromechanical analysis of aligned and randomly oriented whisker-/short fiber-reinforced composites,” CMES: Computer Modeling in Engineering & Sciences, Vol. 40, No. 3, pp. 271-305.

Lee, H.K., Pyo, S.H. and Kim, B.R. (2009). “On joint strengths, peel stresses and failure modes in adhesively bonded double-strap and supported single-lap GFRP joints,” Composite Structures, Vol. 87, No. 1, pp. 44-54.

Lee, H.K., Ha, S.K. and Afzal, M. (2008). “Finite element analysis of shear-deficient RC beams strengthened with CFRP strips/sheets,” Structural Engineering and Mechanics, Vol. 30, No. 2, pp. 247-261.

Lee, H.K. and Ju, J.W. (2008). “3D micromechanics and effective moduli for brittle composites with randomly located interacting microcracks and inclusions,” International Journal of Damage Mechanics, Vol. 17, pp. 377 - 417.

Lee, H.K., Hausmann, R.L. and Seaman, W.C. (2008). “Effectiveness of retrofitting damaged concrete beams with sprayed fiber-reinforced polymer coating,” Journal of Reinforced Plastics and Composites, Vol. 27, pp. 1269-1286.

Lee, H.K. and Pyo, S.H. (2008). “An elastoplastic multi-level damage model for ductile matrix composites considering evolutionary weakened interface,” International Journal of Solids and Structures, Vol. 45, No. 6, pp. 1614-1631.

Lee, H.K. and Pyo, S.H. (2008). “Multi-level modeling of effective elastic behavior and progressive weakened interface in particulate composites,” Composites Science and Technology, Vol. 68, No. 2, pp. 387-397.

Lee, H.K., Kim, B.R. and Ha, S.K. (2008). “Numerical evaluation of shear strengthening performance of CFRP sheets/strips and sprayed epoxy coating repair systems,” Composites Part B: Engineering, Vol. 39, No. 5, pp. 851-862.

Lee, H.K. and Pyo, S.H. (2007). “Micromechanics-based elastic damage modeling of particulate composites with weakened interfaces,” International Journal of Solids and Structures, Vol. 44, No. 25-26, pp. 8390-8406.

Lee, H.K. and Kim, B.R. (2007). “Numerical characterization of compressive response and damage evolution in laminated plates containing a cutout,” Composites Science and Technology, Vol. 67, No. 11-12, pp. 2221-2230.

Lee, H.K. and Ju, J.W. (2007). “A three-dimensional stress analysis of a penny- shaped crack interacting with a spherical inclusion,” International Journal of Damage Mechanics, Vol. 16, No. 3, pp. 331-359.

Liang, Z., Lee, H.K. and Suaris, W. (2006). “Micromechanics-based constitutive modeling for unidirectional laminated composites,” International Journal of Solids and Structures, Vol. 43, No. 18-19, pp. 5674-5689.

Lee, H.K. and Simunovic, S. (2006). “Prediction of crack evolution and effective elastic behavior of damage- tolerant brittle composites,” Computer Methods in Applied Mechanics and Engineering, Vol. 196, No. 1-3, pp. 118-133.

Lee, H.K., Avila, G. and Montanez, C. (2005). “Numerical study on retrofit and strengthening performance of sprayed fiber reinforced polymer,” Engineering Structures, Vol. 27, No. 10, pp. 1476-1487.

Lee, H.K. and Shin, D.K. (2004). “A computational investigation of crack evolution and interactions of microcracks and particles in particle-reinforced brittle composites,” Composite Structures, Vol. 64, No. 3-4, pp. 419-431.

Lee, H.K., Simunovic, S. and Shin, D.K. (2004). “A computational approach for prediction of the damage evolution and crushing behavior of chopped random fiber composites,” Computational Materials Science, Vol. 29, No. 4, pp. 459-474.

Lee, H.K. and Liang, Z. (2004). “Computational modeling of the response and damage behavior of fiber-reinforced cellular concrete,” Computers and Structures, Vol. 82, No. 7-8, pp. 581-592.

Lee, H.K. and Hausmann, L.R. (2004). “Structural repair and strengthening of damaged RC beams with sprayed FRP,” Composite Structures,, Vol. 63, No.2, pp. 201-209.

Lee, H.K. (2004). “Effectiveness of anchorage in concrete beams retrofitted with sprayed fiber reinforced polymers,” Journal of Reinforced Plastics and Composites, Vol. 23, No. 12, pp. 1285-1300.

Lee, H.K., Avila, G. and Schadler, D. (2003). “A computational approach for prediction of the performance of concrete beams retrofitted with sprayed fiber reinforced polymers,” KSCE Journal of Civil Engineering, Vol. 7, No. 6, pp. 675-682.

Lee, H.K. and Shin, D.K. (2003). “A computational approach for modeling of crack nucleation and growth in damage-tolerant brittle materials,” KSCE Journal of Civil Engineering, Vol. 7, No. 5, pp. 537-546.

Lee, H.K. and Simunovic, S. (2002). “A damage mechanics model of crack-weakened, chopped fiber composites under impact loading,” Composites Part B: Engineering, Vol. 33, No. 1, pp. 25-34.

Lee, H.K. (2001) . “A computational approach to the investigation of impact damage evolution in discontinuously reinforced fiber composites,” Computational Mechanics, Vol. 27, No. 6, pp. 504-512.

Ju, J.W. and Lee, H.K. (2001). “A micromechanical damage model for effective elastoplastic behavior of partially debonded ductile matrix composites,” International Journal of Solids and Structures, Vol. 38, No. 36-37, pp. 6307-6332.

Lee, H.K. and Simunovic, S. (2001). “A damage constitutive model of progressive debonding in aligned discontinuous fiber composites,” International Journal of Solids and Structures, Vol. 38, No. 5, pp. 875-895.

Ju, J.W. and Lee, H.K. (2000). “A micromechanical damage model for effective elastoplastic behavior of ductile matrix composites considering evolutionary complete particle debonding,” Computer Methods in Applied Mechanics and Engineering,, Vol. 183, No. 3-4, pp. 201-222.

Lee, H.K. and Simunovic, S. (2000). “Modeling of progressive damage in aligned and randomly oriented discontinuous fiber polymer matrix composites,” Composites Part B: Engineering, Vol. 31, No. 2, pp. 77-86.

Jang, J.G., Park, S.M. and Lee, H.K. (2017). “Alkali-activation of fly ash: Performances and potential industrial applications,” Chapter 5 in: Fly ah: Properties, Analysis and Performance (Editor: Parker, J.), pp. 99-121, Nova Science Publishers, Inc. [ISBN: 978-1-53610-533-9 (ebook)].

Kim, H.K. and Lee, H.K. (2015). “Bacteria for surface treatment of normal and lightweight concrete: A case study,” Chapter 16 in: Biotechnologies and biomimetics for civil engineering (Editors: Torgal, F.P., Labrincha, J.A., Diamanti, M.V., Yu, C.-P. and Lee, H.K.), Springer. [ISBN: 978-3-319-09286-7].

Lee, H.K. and Kim, B.R. (2012). “Interfaces in macro and micro composites,” Chapter 3 in: Polymer Composites. Volume I: Macro- and Micro Composites (Editors: Thomas, S., Joseph, K., Malhotra, S.K., Goda, K., and Sreekala, M.S.), pp. 83-110, Wiley-VCH Verlag GmbH & Co. KGaA. [ISBN-10: 3-527-32624-3, ISBN-13: 978-3-527-32624-2].

Kim, B.R., Ha, S.K., Na, S. and Lee, H.K. (2012). “Application of FRP composites for rehabilitation in civil engineering: experiments and advanced computational methods,” Chapter 18 in: Fiber-Reinforced Composites (Editor: Cheng, Q.), pp. 571-604, Nova Science Publishers, Inc. [ISBN: 978-1-61470-303-7 (Hardcover), ISBN: 978-1-61470-433-1 (ebook)].

Lee, H.K., Kim, B.R. and Na, S. (2011). “Microscale damage analysis for microcrack propagation of brittle composite materials,” Chapter 7 in: Advances in Materials Science Research. Volume 1 (Editor: Wythers, M.C.), pp. 235-258, Nova Science Publishers, Inc. [ISBN: 978-1-61728-109-9 (Hardcover), ISBN: 978-1-61728-744-2 (ebook), ISBN: 978-1-61728-895-1 (Online Book)].

Kim, B.R. and Lee, H.K. (2010). “Micromechanical analysis for laminated composite materials,” Chapter 4 in: Composite Laminates: Properties, Performance and Applications (Editors: Doughett, A. and Asnarez, P.), pp. 201-232, Nova Science Publishers, Inc. [ISBN: 978-1-60741-620-3 (Hardcover), ISBN: 978-1-61122-592-1 (ebook)].